TRACOPOWER TSP-WR Switched Mode DIN Rail Power Supply, 187 → 550V ac ac Input, 24V dc dc Output, 15A Output, 360W
Technical documents
Specifications
Brand
TRACOPOWERSeries
TSP-WR
Type
Switched Mode
Electrical Phase
1
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
187 → 550V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
15A
Power Rating
360W
Dimensions
125 x 80 x 125mm
Height
125mm
Width
80mm
Depth
125mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-25°C
Efficiency
88%
Ripple And Noise
150mV Pk-Pk
MTBF
350000h
Output Voltage Adjustment Range
24 → 28V
Load Regulation
±0.5%
Special Features
Overvoltage and Short Circuit Protection
Maximum Temperature
+70°C
Standards Met
CE, EN 60950-1, UL/CSA 60950-1
Distrelec Product Id
16900815
Country of Origin
China
Product details
180 to 600W TSP WR Series
A extension to the TSP series of DIN rail mount power supplies featuring an ultrawide input range which allows the modules to be used in almost all single and 2 phase power networks worldwide.
With a Battery Controller Module also available, you can rest assured that a fully charged battery will supply the output power in the event of a mains power failure. The battery is protected against deep discharge.
Included in the range is a TSP Buffer Module which offers an ideal and cost effective alternative to a battery based back up system by holding the output voltage of 24V dc after brown outs and voltage dips of ten full 50Hz cycles at full load.
For Global use with single and two phase
Rugged metal case for harsh industrial environments
Power OK signal
Remote on / off
Shock and vibration proof
Buffer module for power backup and Battery controller module also available
Standards
IEC / EN 61204-3
€ 483.13
€ 483.13 Each (ex VAT)
1
€ 483.13
€ 483.13 Each (ex VAT)
1
Stock information temporarily unavailable.
Please check again later.
Technical documents
Specifications
Brand
TRACOPOWERSeries
TSP-WR
Type
Switched Mode
Electrical Phase
1
AC or DC Input Voltage
ac
Number of Outputs
1
Input Voltage
187 → 550V ac
AC or DC Output Voltage
dc
Output Voltage
24V dc
Output Current
15A
Power Rating
360W
Dimensions
125 x 80 x 125mm
Height
125mm
Width
80mm
Depth
125mm
Mounting Type
DIN Rail Mount
Minimum Temperature
-25°C
Efficiency
88%
Ripple And Noise
150mV Pk-Pk
MTBF
350000h
Output Voltage Adjustment Range
24 → 28V
Load Regulation
±0.5%
Special Features
Overvoltage and Short Circuit Protection
Maximum Temperature
+70°C
Standards Met
CE, EN 60950-1, UL/CSA 60950-1
Distrelec Product Id
16900815
Country of Origin
China
Product details
180 to 600W TSP WR Series
A extension to the TSP series of DIN rail mount power supplies featuring an ultrawide input range which allows the modules to be used in almost all single and 2 phase power networks worldwide.
With a Battery Controller Module also available, you can rest assured that a fully charged battery will supply the output power in the event of a mains power failure. The battery is protected against deep discharge.
Included in the range is a TSP Buffer Module which offers an ideal and cost effective alternative to a battery based back up system by holding the output voltage of 24V dc after brown outs and voltage dips of ten full 50Hz cycles at full load.
For Global use with single and two phase
Rugged metal case for harsh industrial environments
Power OK signal
Remote on / off
Shock and vibration proof
Buffer module for power backup and Battery controller module also available
Standards
IEC / EN 61204-3