SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

RS Stock No.: 131-1336Brand: SEGGERManufacturers Part No.: 8.07.01 SWD Isolator
brand-logo
View all in Development Tool Accessories

Technical documents

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Stock information temporarily unavailable.

€ 317.72

€ 317.72 Each (ex VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Available in multiples of 1
1€ 317.72
2€ 613.41
3€ 920.12
4€ 1,226.82
5€ 1,533.53
6€ 1,840.23
7€ 2,146.94
8€ 2,453.64
9€ 2,760.35
10€ 3,067.06
11€ 3,373.76
12€ 3,680.47
13€ 3,987.17
14€ 4,293.88
15€ 4,600.58

€ 317.72

€ 317.72 Each (ex VAT)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Stock information temporarily unavailable.

1

Available in multiples of 1
1€ 317.72
2€ 613.41
3€ 920.12
4€ 1,226.82
5€ 1,533.53
6€ 1,840.23
7€ 2,146.94
8€ 2,453.64
9€ 2,760.35
10€ 3,067.06
11€ 3,373.76
12€ 3,680.47
13€ 3,987.17
14€ 4,293.88
15€ 4,600.58

Stock information temporarily unavailable.

Please check again later.

quantityUnit price
1 - 1€ 317.72
2+€ 306.71

Technical documents

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET