Technical documents
Specifications
Brand
Schneider ElectricCoil Voltage
110 V ac
Number of Poles
3
Contact Voltage Rating
690 V ac
Contact Current Rating
10 A
Series
CAD5
Range
TeSys CA
Normal State Configuration
5NO
Terminal Type
Screw
Length
77mm
Width
45mm
Depth
86mm
Better World Verification
Green Premium
Better World Product (Find out more)
Yes
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+60°C
Country of Origin
France
Product details
Schneider Electric TeSys D Series Control Relay Contactors CAD Series.
Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.
What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.
Features and Benefits.
- Thermal contacts 10A with operation down to 17V 5mA
- AC and DC Control circuits available
- Low-consumption DC and silent
- Variety of auxiliary contacts, and timer modules
- 5 pole
- Resistance to vibration & temperature cycling
- Rated impulse withstands voltage 6 kV conforming to IEC 60947
Protection ratings & Safety features.
- BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
- CSA and UL certification
- IP2x protection front face conforming to VDE 0106
- TH conforming to IEC 60068
Applications.
- Used to create motor starters for any type of application and integration in control systems. Other applications include:
- Switching contactor or relay coils
- Powering control and signalling equipment
- Simple control systems
- Industry, infrastructure, and building
Stock information temporarily unavailable.
Please check again later.
€ 71.84
Each (ex VAT)
1
€ 71.84
Each (ex VAT)
1
Technical documents
Specifications
Brand
Schneider ElectricCoil Voltage
110 V ac
Number of Poles
3
Contact Voltage Rating
690 V ac
Contact Current Rating
10 A
Series
CAD5
Range
TeSys CA
Normal State Configuration
5NO
Terminal Type
Screw
Length
77mm
Width
45mm
Depth
86mm
Better World Verification
Green Premium
Better World Product (Find out more)
Yes
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+60°C
Country of Origin
France
Product details
Schneider Electric TeSys D Series Control Relay Contactors CAD Series.
Featuring a new design, the TeSys D series of contactors are simple and fast to set up in all automation applications. Compliant with international standards these relays maintain a compact size of 45 to 55mm (40 to 65A). Assuring a permanent tightening quality even in the event of conductor creep, all versions are equipped with EverLink which is a new patented technology. Each relay is also as standard 10A with 5 poles, suitable for AC or DC control. A version is also available with low consumption and built in suppression.
What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.
Features and Benefits.
- Thermal contacts 10A with operation down to 17V 5mA
- AC and DC Control circuits available
- Low-consumption DC and silent
- Variety of auxiliary contacts, and timer modules
- 5 pole
- Resistance to vibration & temperature cycling
- Rated impulse withstands voltage 6 kV conforming to IEC 60947
Protection ratings & Safety features.
- BS 4794, EN 60947-5, IEC 60947-5-1, NF C 63-140 and VDE 0660 standards
- CSA and UL certification
- IP2x protection front face conforming to VDE 0106
- TH conforming to IEC 60068
Applications.
- Used to create motor starters for any type of application and integration in control systems. Other applications include:
- Switching contactor or relay coils
- Powering control and signalling equipment
- Simple control systems
- Industry, infrastructure, and building