Honeywell HDLS Series Rod Limit Switch, NO/NC, SPDT, Die Cast Zinc Housing, 600V ac Max, 10A Max
Technical documents
Specifications
Brand
HoneywellActuator Type
Rod
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
10A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Series
HDLS
Action Type
Snap Action
Length
106.42mm
Minimum Operating Temperature
-40°C
Depth
2.43in
Width
1.62in
Maximum Operating Temperature
+121°C
Product details
Maintained Contact, Spoke Actuator Limit Switch
This spoke actuator switch is used to detect a transient target and remember its position.
The target passes through the spoke rotating the spoke by a quarter turn. This toggles the switch, normally a closed circuit, from ON to OFF. If another target transitions through the spoke, it will again toggle the switch this time from OFF to ON. Alternatively, the target can return back through the spoke again toggling the switch from OFF to ON. The spoke once rotated will maintain its position until it is moved to a new section - this is unlike normal limit switch actuation which normally will want to return to its rest position - with this switch there are 4 rest positions at each 90° points in a 360° rotation.
The tip over point is at 60° at which point the spoke will rotate to the next segment position.
Approvals
UL, CSA
Standards
EN60947-5-1, IEC947-5-1
€ 615.57
€ 615.57 Each (ex VAT)
1
€ 615.57
€ 615.57 Each (ex VAT)
1
Stock information temporarily unavailable.
Please check again later.
Technical documents
Specifications
Brand
HoneywellActuator Type
Rod
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
10A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Series
HDLS
Action Type
Snap Action
Length
106.42mm
Minimum Operating Temperature
-40°C
Depth
2.43in
Width
1.62in
Maximum Operating Temperature
+121°C
Product details
Maintained Contact, Spoke Actuator Limit Switch
This spoke actuator switch is used to detect a transient target and remember its position.
The target passes through the spoke rotating the spoke by a quarter turn. This toggles the switch, normally a closed circuit, from ON to OFF. If another target transitions through the spoke, it will again toggle the switch this time from OFF to ON. Alternatively, the target can return back through the spoke again toggling the switch from OFF to ON. The spoke once rotated will maintain its position until it is moved to a new section - this is unlike normal limit switch actuation which normally will want to return to its rest position - with this switch there are 4 rest positions at each 90° points in a 360° rotation.
The tip over point is at 60° at which point the spoke will rotate to the next segment position.
Approvals
UL, CSA
Standards
EN60947-5-1, IEC947-5-1