APEM Rocker Switch Connector for use with Rocker Switch

RS Stock No.: 507-277Brand: APEMManufacturers Part No.: U2292
brand-logo
View all in Rocker Switch Connectors

Technical documents

Specifications

Brand

Apem

Accessory Type

Connector

For Use With

Rocker Switch

Country of Origin

France

Product details

KR Rocker Cases - Double Pole

Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals
Available in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)
A large variety of switch configurations and actuator colours/markings available
Suitable actuators should be ordered separately (see typically 507-267 and range)
To facilitate wiring harness preparation and quick panel assembly, all double pole switch cases can also be used with rear crimp connector housing 507-576, accepting up to 10 crimps terminals (except for 507-431, which can be used with connector housing 507-560)
Other accessories include switch case housings 507-611 & 507-615, panel blanking plugs 507-318 and actuator removal tool 507-312
Switch case panel knockout 36.80x21.08mm
Operating Temperature -40 to +85 °C
Contact Resistance 10 mΩ
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals

IP68 Modular KR Series

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

€ 4.90

Each (ex VAT)

APEM Rocker Switch Connector for use with Rocker Switch

€ 4.90

Each (ex VAT)

APEM Rocker Switch Connector for use with Rocker Switch
Stock information temporarily unavailable.

Buy in bulk

quantityUnit price
1 - 24€ 4.90
25 - 99€ 4.59
100 - 249€ 4.46
250+€ 4.37

Technical documents

Specifications

Brand

Apem

Accessory Type

Connector

For Use With

Rocker Switch

Country of Origin

France

Product details

KR Rocker Cases - Double Pole

Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals
Available in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)
A large variety of switch configurations and actuator colours/markings available
Suitable actuators should be ordered separately (see typically 507-267 and range)
To facilitate wiring harness preparation and quick panel assembly, all double pole switch cases can also be used with rear crimp connector housing 507-576, accepting up to 10 crimps terminals (except for 507-431, which can be used with connector housing 507-560)
Other accessories include switch case housings 507-611 & 507-615, panel blanking plugs 507-318 and actuator removal tool 507-312
Switch case panel knockout 36.80x21.08mm
Operating Temperature -40 to +85 °C
Contact Resistance 10 mΩ
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals

IP68 Modular KR Series