Technical documents
Specifications
USB Channels
0
Number of ADC Units
1
Number of PWM Units
1
Data Bus Width
8bit
Program Memory Type
Flash
RAM Size
1 kB
Family Name
ATmega
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Device Core
AVR
Instruction Set Architecture
RISC
Mounting Type
Through Hole
Maximum Frequency
10MHz
Pin Count
40
Program Memory Size
16 kB
Pulse Width Modulation
1 (6 Channel)
ADCs
1(8 x 10 bit)
Typical Operating Supply Voltage
1.8 → 5.5 V
Height
4.44mm
Dimensions
52.57 x 13.97 x 4.44mm
Width
13.97mm
Length
52.57mm
Package Type
PDIP
Brand
MicrochipCountry of Origin
Thailand
Product details
Air Amplifier
Creates a large flow of air at the output from a small amount of compressed air at the input.
The output is field adjustable and can achieve high amplification ratios
Can also be used to generate up to 8in. Hg vacuum level
The total output of each unit can be changed by adjusting the input pressure and/or the gap opening within the unit itself
Stock information temporarily unavailable.
Please check again later.
P.O.A.
Standard
2
P.O.A.
Standard
2
Technical documents
Specifications
USB Channels
0
Number of ADC Units
1
Number of PWM Units
1
Data Bus Width
8bit
Program Memory Type
Flash
RAM Size
1 kB
Family Name
ATmega
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Device Core
AVR
Instruction Set Architecture
RISC
Mounting Type
Through Hole
Maximum Frequency
10MHz
Pin Count
40
Program Memory Size
16 kB
Pulse Width Modulation
1 (6 Channel)
ADCs
1(8 x 10 bit)
Typical Operating Supply Voltage
1.8 → 5.5 V
Height
4.44mm
Dimensions
52.57 x 13.97 x 4.44mm
Width
13.97mm
Length
52.57mm
Package Type
PDIP
Brand
MicrochipCountry of Origin
Thailand
Product details
Air Amplifier
Creates a large flow of air at the output from a small amount of compressed air at the input.
The output is field adjustable and can achieve high amplification ratios
Can also be used to generate up to 8in. Hg vacuum level
The total output of each unit can be changed by adjusting the input pressure and/or the gap opening within the unit itself