Technical documents
Specifications
Power Supply Type
Dual
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Output Type
CMOS
Mounting Type
Surface Mount
Pin Count
28
Typical Slew Rate
10V/µs
Brand
Analog DevicesDimensions
11.58 x 11.58 x 3.94mm
Typical Dual Supply Voltage
±15V
Height
3.94mm
Length
11.58mm
Width
11.58mm
Package Type
PLCC
Country of Origin
Ireland
Product details
dsPIC Starter Kit
The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the boards dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 devices Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.
dsPIC33FJ256GP506 40MIPS DSC, 256KB Flash memory, 16KB SRAM
On-board 4Mbit serial Flash memory
16/24/32bit audio CODEC with a maximum sampling frequency of 48kHz
Low cost audio capture and playback circuitry using the 12bit ADC and PWM audio
Microphone and line level inputs with adjustable input gain
100mW headphone amplifier with digital volume control
2 x user switches
3 x user LEDs
Temperature sensor
Powered from USB port
Supplied with
USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.
dsPIC® Development Tools
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Power Supply Type
Dual
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Output Type
CMOS
Mounting Type
Surface Mount
Pin Count
28
Typical Slew Rate
10V/µs
Brand
Analog DevicesDimensions
11.58 x 11.58 x 3.94mm
Typical Dual Supply Voltage
±15V
Height
3.94mm
Length
11.58mm
Width
11.58mm
Package Type
PLCC
Country of Origin
Ireland
Product details
dsPIC Starter Kit
The MPLAB Starter Kit for dsPIC Digital Signal Controllers connects directly to the USB port on a PC. The USB connection supplies both communications and power to the board. The starter kit includes debug and programmer circuitry that allows applications to be programmed onto the boards dsPIC33 device and then debugged, all using MPLAB IDE. Audio input signals from an external microphone or audio equipment are routed to the ADC module in the on-board dsPIC33 device for software processing. Alternatively, applications can use the audio codec for converting the audio signal. Output signals can be generated by the dsPIC33 devices Output Compare module as a pulse-width modulated (PWM) digital waveform. This PWM signal is converted to an analogue signal by a low-pass filter on the starter kit board. Alternatively, applications can output audio data using the audio codec. The output audio signal is then amplified using a headphone amplifier circuit for playback on an output device.
dsPIC33FJ256GP506 40MIPS DSC, 256KB Flash memory, 16KB SRAM
On-board 4Mbit serial Flash memory
16/24/32bit audio CODEC with a maximum sampling frequency of 48kHz
Low cost audio capture and playback circuitry using the 12bit ADC and PWM audio
Microphone and line level inputs with adjustable input gain
100mW headphone amplifier with digital volume control
2 x user switches
3 x user LEDs
Temperature sensor
Powered from USB port
Supplied with
USB cable, CD containing MPLAB IDE, MPLAB C Compiler for dsPIC DSCs, application notes and sample programs.