Technical documents
Specifications
Brand
Phoenix ContactNumber of Channels
1
Barrier Type
Galvanic Barrier
Maximum Voltage
125 V dc, 253V ac
Hazardous Area Certification
ATEX
Maximum Operating Temperature
+65°C
Supply Voltage
24 → 230V ac/dc
Maximum Current
7.4mA
Minimum Operating Temperature
-20°C
Series
MACX MCR-EX-T-UIREL-UP
Operating Temperature Range
-20 → +65°C
Country of Origin
Germany
Product details
MACX MCR-EX-T Series Signal Conditioners
Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection
Warning
For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
Phoenix ContactNumber of Channels
1
Barrier Type
Galvanic Barrier
Maximum Voltage
125 V dc, 253V ac
Hazardous Area Certification
ATEX
Maximum Operating Temperature
+65°C
Supply Voltage
24 → 230V ac/dc
Maximum Current
7.4mA
Minimum Operating Temperature
-20°C
Series
MACX MCR-EX-T-UIREL-UP
Operating Temperature Range
-20 → +65°C
Country of Origin
Germany
Product details
MACX MCR-EX-T Series Signal Conditioners
Programmable Ex-i temperature transducer with analog output and 1 limit value relay
Standard configuration
Resistance thermometer in two, three, or four wire technology
Galvanic isolation
Wide range power supply
Spring cage connection
Warning
For a safe series connection the use of the normally open contacts at the termination points 2.5 and 2.6, as well as 3.5 and 3.6 is necessary.
For a safe parallel connection the use of the normally closed contacts of both relays at the termination points 2.4 and 2.5 respectively 3.4 and 3.5 is mandatory