Technical documents
Specifications
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Product details
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Supervisory & Reset Circuits - Microchip
Stock information temporarily unavailable.
Please check again later.
£ 0.58
Each (Supplied on a Reel) (ex VAT)
5
£ 0.58
Each (Supplied on a Reel) (ex VAT)
5
Buy in bulk
quantity | Unit price | Per Reel |
---|---|---|
5 - 20 | £ 0.58 | £ 2.90 |
25 - 95 | £ 0.56 | £ 2.80 |
100+ | £ 0.56 | £ 2.80 |
Technical documents
Specifications
Brand
MicrochipNumber of Supervisors
1
Output Driver
Active Low, Open Drain
Mounting Type
Surface Mount
Maximum Reset Active Time
700ms
Package Type
SOT-23
Pin Count
3
Dimensions
2.9 x 1.3 x 0.95mm
Maximum Monitored Voltage
4.75V
Maximum Operating Supply Voltage
5.5 V
Minimum Monitored Voltage
4.62V
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Minimum Operating Supply Voltage
1 V
Product details
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current