Technical documents
Specifications
Brand
Xylem FlojetMaximum Flow Rate
160L/min
Supply Voltage
230 V
Input Connection
1-1/4 in G
Maximum Head
8.8m
Maximum Working Pressure
1.7 bar
Body Material
PP
Coupling Type
Magnetic
Input Power
400W
Maximum Fluid Temperature
+80°C
Input Connection Size
1-1/4in
Output Connection Size
3/4in
Pump Type
Centrifugal
Wetted Materials
Alumina (Spindle & Thrust Washer), PP (Encapsulated Magnet & Housing), PPS (Spindle Housing), Standard EPDM (O-Ring)
IP Rating
IP55
Country of Origin
United Kingdom
Product details
160 l/min Magnetically Coupled Pumps
Rated for continuous duty and ideally suited for water or chemical transfer and re-circulation applications
Trouble free pumping of acids and alkalis
Pump chamber and impeller: Polypropylene with alumina-ceramic shaft/thrust washers, Fluoro-elastomer rubber static O-ring seal, and Graphion impeller bearings
Not self priming; requires a flooded suction of approximately 500mm
Mounting plate offers several fixing options
Can handle fluids from -20 to +80°C with a maximum specific gravity of 1.2
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical documents
Specifications
Brand
Xylem FlojetMaximum Flow Rate
160L/min
Supply Voltage
230 V
Input Connection
1-1/4 in G
Maximum Head
8.8m
Maximum Working Pressure
1.7 bar
Body Material
PP
Coupling Type
Magnetic
Input Power
400W
Maximum Fluid Temperature
+80°C
Input Connection Size
1-1/4in
Output Connection Size
3/4in
Pump Type
Centrifugal
Wetted Materials
Alumina (Spindle & Thrust Washer), PP (Encapsulated Magnet & Housing), PPS (Spindle Housing), Standard EPDM (O-Ring)
IP Rating
IP55
Country of Origin
United Kingdom
Product details
160 l/min Magnetically Coupled Pumps
Rated for continuous duty and ideally suited for water or chemical transfer and re-circulation applications
Trouble free pumping of acids and alkalis
Pump chamber and impeller: Polypropylene with alumina-ceramic shaft/thrust washers, Fluoro-elastomer rubber static O-ring seal, and Graphion impeller bearings
Not self priming; requires a flooded suction of approximately 500mm
Mounting plate offers several fixing options
Can handle fluids from -20 to +80°C with a maximum specific gravity of 1.2